Skip to main content

Refrigerated storage with high speed door(ประตูไฮสปีด) | COAD THAILAND

COAD high speed door C-3

GOOD COOLING EFFICIENCY
Hello, this is the COAD High Speed Door. above is a speed door installed in Arouson, Thailand.
High speed doors are always installed together in the freezer. The reason is because of the cooling efficiency. There is a tremendous amount of cooling that escapes each time the door is opened and closed, so you need a speed door that opens and closes quickly.
 
COAD high speed door C-3

SAVING ENERGY
In fact, you can save energy as much as the price of speed door after a year due to reduction of electricity cost in the cooler. Sometimes PVC curtain is used, but speed door sealing is not comparable, so it is worth considering replacing speed door if you use PVC curtain. Of course, you can use both to further reduce energy savings.

AUTOMATION
As shown in the picture below, the pulling switch was applied to set up the forklift truck drivers to quickly open the door and pass through at any time. In addition, metal detection sensors were installed to set up the automatic opening of the forklift.
COAD high speed door C-3

AUTOMATIC RECOVERY
Also, the above installed c-3 models are suitable for the application of the cold storage due to their high seal strength, and the automatic recovery function in the event of a collision, which is suitable for the cold storage where the forklift is frequently operated. 
All products in COAD are made of aluminum and have been made to prevent corrosion due to low temperature or moisture, such as a freezer.
In fact, the test results showed that the environment of -24 degrees can be operated without any problems.
COAD Consultants will visit the site to make the best settings.





Visit and consulting are all free.
Please feel free to contact us.
Check the reasonable cost.
Thai, English, and korean are all possible.
COAD THAILAND
[Tel]
038 878 380 / 090 909 1171
[website]
[blog]
 [Address]
333/33 Moo 2, Tambon Mabyangporn, Ampur Pluankdaeng, Rayong 21140
[E-mail]
coad@highspeeddoor.co.th
[youtube]


Comments

Popular posts from this blog

WHY should COAD be selected from an HIGH SPEED DOOR(ประตูอัตโนมัติความเร็วสูง)?

Hello at the rainy season. the industries have the trouble that the products got all wet and employees slip on water from outside. With COAD HIGH SPEED DOOR, customers could protect property and staff The COAD-1 is a basic product that can be applied to an entire industry field and is the most installed product. On the surface, it doesn't look different from the competitors ' products, but at a deeper level, you can see that the differences are huge. Then, we will explore the advantages of COAD unlike our competitors. First, let's look at the most important moving parts. Competitors commonly use worm gears, which is noise and less durable. Then what about the motor on the COAD? It is the motor of Sumitomo Company Japan. It uses hypoid deceleropers unlike traditional worm decelers to improve efficiency by 20 percent.  Its advantages are low noise, low vibration, high efficiency, light weight, and long life. We guarantee 2 year war

COAD High speed door in lumber factory

COAD HIGH SPEED DOOR COAD high speed door is installed in lumber factory COAD Thailand produces high speed door in local factory of Thailand.  Professional Korean experts measure the size of space directly  and make the door for that space.  Then, they install the door.  This is organized process by Korean's technology.  Therefore, we guarantee best quality and service for customers.   COAD supports the requests of customers no later than 24 hours. COAD uses Sumitomo motor made by Japan.  It is low noise and long-operation.  To be sure, COAD guarantees the warranty about the motor up to 1 year.   Therefore, customers do not get any problem for using the door.  Moreover, COAD high speed door is fastest time of operation .  By COAD controller , customers could request the direction and speed of motor.  COAD produces the door for customers' convenience. COAD has various models of high speed door.  This factory gets COAD-3 which is self-recovery model .  Even if vehicle or forkl

COAD industrial door in packaging factory

COAD INDUSTRIAL DOOR COAD installs industrial door in Pp pack (packaging industry) COAD industrial door is managed by diverse sensors .  This factory gets remote control to operate the door for specific person.  The remote control could open six speed doors by using only one.  Additionally, it prevents the crime as anyone could open the door. If customers request the activation of door for vehicle or forklift,  COAD installs loop sensor .  It detects metal of it as it passes on the loop line under the ground. Professional Korean experts measure the size of space  and produce the door for that space.  Thus, COAD industrial door is perfectly sealed in the space without any gap.  Moreover, the material of door is aluminium .  It is durability from water and impact.  Thus, customers use the door for long-period.  COAD Thailand has local industry in Thailand.  So, we support shortest time of production and service for customers.