Skip to main content

HI-speed door| Factory speed door|ประตูไฮสปีด|COAD THAILAND

작성자:
Companies that use hanger doors in factories are not always open/closed.
The hanger door, which is made of panels, is suitable for use in the room, but it is too heavy to open and close frequently.
No matter what the existing doors are installed, it's not difficult to do further work.
It's an up and down automatic door that opens from the bottom up, so it doesn't take up much space.
All you need to do is to have enough room to put a drum in the upper part.
There's no problem installing the air curtain together!
In the food industry, pharmaceutical industry and chemicals industry, separation of the process must be thorough.
And you can also use the more space where people and items travel.
As shown in the image above, you can install speed door with pre-existing hanger door.
The company applied the Hyponic motor of Sumitomo, Japan. which one is low slip noise and high efficiency drive.
Before and after the door is opened, it must be moved for long periods of time to pass through the object. There is less risk of ingress of fine dust, etc.

Two-way open control is essential when creating a clean room.
They connect two doors so that if one door is open, the other door cannot be opened.




Please feel free to contact us.
Check the reasonable cost.
Thai, English, and Korean are all possible.
High speed doors catalog

http://www.highspeeddoor.co.th/th/en/download/catalog-160601e.pdf

High speed doors drawing




COAD THAILAND
[Tel]
038 878 380 / 090 909 1171
[Website]
[Blog]
 [Address]
9 Moo 5, Tambon Khao Khan Song, Amphoe Sri Racha, Chang Wat Chon Buri 20110
[E-mail]
coad@highspeeddoor.co.th
[youtube]


Comments

Post a Comment

Popular posts from this blog

COAD THAILAND HIGH SPEED DOOR, RAPID DOOR, AUTOMATIC DOOR, ประตูความเร็วสูง, ประตูผ้าใบเปิดปิดอัตโนมัติความเร็วสูง, ประตูม่านพลาสติกความเร็วสูง

작성자:
* COAD THAILAND * Customized high speed door( ประตูม้วนอัตโนมัติ) ! COAD Thailand does not sell the pre-made or regulated rapid door( ประตูอัตโนมัติความเร็วสูง) . What is the difference of COAD Thailand automatic rolling up door( ประตูอุตสาหกรรม) ? COAD-3 If the industry has lots of transportation by vehicle or forklift, COAD Thailand suggests COAD-3 which is self-recovery model. Even if the vehicle collides with the high speed door( ประตูความเร็วสูง) , this model is possible to replace the sheet as original condition by itself. The rail is zipper type so it is applied. Moreover, the sealing power is highest class in the business world. Therefore, customers save repair cost and prevent the inflow of outside objects. Let's see the simulation by video. No restriction This customer already had the sliding door in their entrance. But, this door is too heavy to open and close it. Also, the rail embedded in the ground is broken. So, they change it to high speed ...
Post a Comment
Read more

COAD Thailand : High speed door(ประตูไฮสปีด),PVC door(ประตูม้วน PVC)

작성자:
First of all, the speed door COAD high speed door( ประตูไฮสปีด)  provides a wind-bar which connects the sheet to each other to increase the resistance of the wind. It relieves the build-up of the sheets and supports them to keep them from falling off the rails. However, you should be prepared in special cases, such as typhoons, because the factory door does not aimed at holding the wind like a storm. It is recommended to keep the automatic door open when wind gusts above the normal level to reduce wind pressure. Once the strong winds have died down, you will be able to use the speed door( ประตูความเร็วสูง)  again. Sometimes you say that industrial automation doesn't work normally. The first thing to check is the safety sensor. For safety reasons, the high speed door is designed to stop PCC door  movement if objects are detected by the photo sensor for more than three minutes. If the controller shows error code S and the high speed automatic door does no...
Post a Comment
Read more

High speed door| Rapid door|ประตูไฮสปีด|COAD THAILAND

작성자:
It was the first Korean automated door industry to achieve European CE certification and set the standards for industrial automatic door manufacturing process. It has a safe and hygienic production line and is one of the best in the quality and service of speed doors. As the product is manufactured directly in the RAYONG, THAILAND, it provides delivery and A/S throughout Thailand, the service and installation is fast. Experts who have been trained in Korea's headquarters are taking field measurements, installation and A/S throughout Thailand. Therefore, any site can provide the same quality of high speed automatic door service as KOREA. It's important to control the entrance because of the various materials and manpower, including forklift and top cars. For fast movement and field safety, separating people from the vehicle entrances is also an option. With an automatic sensor that can distinguish objects, if a person passes, the door will open at about 2 meters, but t...
Post a Comment
Read more