Skip to main content

High speed door and Sensor | ประตูความเร็วสูงและเซนเซอร์| COAD THAILAND

작성자:

COAD-3: Automatic recovery type


This is COAD-3,an industrial automatic door for automatic recovery.
It has a system that, as its name suggests, automatically recovers if the sheet leaves the rail due to an external impact.
The right and left frames are fitted with tooth-type "tooth," which holds the sheet tightly. The tooth made of high-strength plastic is used for automatic door up and down movement.
Normally, tooth help to operate normally at the factory doors.
A strong external pressure, such as a vehicle crash, allows the sheet to exit smoothly.
This ensures driver safety and minimizes damage to the sheet.

Then repeat the up and down movement once, and the sheet will
Enter the tooth rails and recover your original form!
Recovery is simple enough that you don't need to call a repair technician, so you can save on the A/S cost.
You can also open and close doors quickly and safely by pushing the door with a forklift in an emergency.

Installation in perfume factory


You can install automatic factory doors in the factory to prevent a fragrances from being mixed or diffused. If there was frequent access to equipment and supplies, you would become very convenient to move after installing the automatic door.
You can open the door manually by pressing the switch, but you can open it automatically with cutting-edge sensors such as the metal sensor (LOOP sensor), infrared sensor, and ultrasonic sensor!

Metal detecting sensor


The metal detecting sensor places a loop coil on the floor to detect that the magnetic field formed at this point is transformed into a metal object approach. Not only is it strong for moisture and heat, but it is also semi-permanent and applies to high speed doors installed externally.

Photo sensor


Photo sensor (safety sensor) applies to all COAD products!
A safety sensors consisting of a light emitting part and light receiving part are attached to the left and right sides of the automatic door.
If there is a person or an object in the middle of the automatic door, The light receiving part will not receive light from the light emitting part. The automatic door again moves up and remains stop.

High speed door catalog

http://www.highspeeddoor.co.th/th/en/download/catalog-160601e.pdf

High speed door drawing




Visit and consulting are all free.
Please feel free to contact us.
Check the reasonable cost.
Thai, English, and korean are all possible.

COAD THAILAND
[Tel]
038 878 380 / 090 909 1171
[website]
[blog]
 [Address]
9 Moo 5, Tambon Khao Khan Song, Amphoe Si Racha, Chang Wat Chon Buri 20110
[E-mail]
coad@highspeeddoor.co.th
[youtube]


Comments

Post a Comment

Popular posts from this blog

Refrigerated storage with high speed door(ประตูไฮสปีด) | COAD THAILAND

작성자:
COAD high speed door C-3 GOOD COOLING EFFICIENCY Hello, this is the COAD High Speed Door. above is a speed door installed in Arouson, Thailand. High speed doors are always installed together in the freezer. The reason is because of the cooling efficiency . There is a tremendous amount of cooling that escapes each time the door is opened and closed, so you need a speed door that opens and closes quickly.   COAD high speed door C-3 SAVING ENERGY In fact, you can save energy as much as the price of speed door after a year due to reduction of electricity cost in the cooler. Sometimes PVC curtain is used, but speed door sealing is not comparable, so it is worth considering replacing speed door if you use PVC curtain. Of course, you can use both to further reduce energy savings. AUTOMATION As shown in the picture below, the pulling switch was applied to set up the forklift truck drivers to quickly open the door and pass through at any time. In addition, metal detection
Post a Comment
Read more

Hi speed door in plastic factory | ประตูอุตสาหกรรม| COAD THAILAND

작성자:
The industrial speed door of COAD is famous for its factory automation and is used in many factories. Like the name Speed Door, it is excellent for maintaining room temperature because the fast opening and closing of the wind completely blocks any opening. Maintaining the indoor temperature allows workers to work in a better environment not only improves the environment, but also increases the efficiency of their work, leading to a decrease in product defects and productivity. Furthermore, if foreign substances enter the interior, it may result in poor plastics manufacture. It can also help reduce the reject rate of products. In addition, there are a lot of odors during the manufacturing process of plastic plants, which can be caught by high speed doors. By installing speed doors with suitable ventilation, it can reduce an escaping odor. High speed door catalog http://www.highspeeddoor.co.th/th/en/download/catalog-160601e.pdf High speed door drawing
Post a Comment
Read more

COAD THAILAND | HIGH SPEED DOOR | ประตูความเร็วสูง | High speed door installed in Thai manufacture

작성자:
* COAD THAILAND * RAPID DOOR ประตูผ้าใบเปิดปิดอัตโนมัติความเร็วสูง Manufacture in Thailand gets high speed door(ประตูม้วนอัตโนมัต) at their factory ประตูความเร็วสูง COAD-1 COAD develops the diverse types of high speed door( ประตูความเร็วสูง)   to install the different locations of company. So, customers select any model of rapid door( ประตูผ้าใบเปิดปิดอัตโนมัติความเร็วสูง)  in their location. This customers get COAD-1 which has wind-bar and wind-lock system to prevent the separation of sheets at windy condition. Therefore, customers could install high speed door( ประตูม่านพลาสติกความเร็วสูง)  in any location. Most manufactures choose this model to reduce the maintenance cost. COAD-1 is possible to replace each sheet by themselves. ประตูผ้าใบเปิดปิดอัตโนมัติความเร็วสูง   No limitation COAD Thailand has local industry managed by professional experts. At the industry, COAD Thailand directly produces and installs the rapid door ( ประตูม้วนอัตโนมัต)  and it
Post a Comment
Read more